Model:XK-225

1. Capacity:  1--10kgs
2.Roller temperature: room temperature～Tap water temperature

3. Heating method: Friction heating

4.Temperature accuracy: no requirement

5.Roller speed: speed (19 RPM)

6. Roller speed ratio:1:1.27

7. Roller size: ф225mm×L 650mm(Taiwan produces high hardness surface plating hard chrome mirror surface treatment, do not stick material, do not take off) Steel excavation technology is not permanent deformation.

8. The roller spacing: 0.1 ~ 10mm adjustable

9. Safety device: more than one touch type emergency stop (there is a reverse function of safety first, human design, operation of workers will always be safe without work injury).

10. Motor: 11 KW*1set (the latest process design, mechanical structure adjustment, and the traditional process mechanical transmission 3.7KW output torque as big as to achieve the purpose of energy conservation).

11. Machine size:(W×D×H) 2600×1000×1590mmIn the case of the same function than the traditional process of small size, reduce the area of waste.

12. Roller lubrication: good wear bearing contact area than the traditional copper sleeve lengthened the service life of 2/3.

13. Mechanical structure: steel plate (less than the traditional process of the weight of the cast iron, small mechanical strength is more high toughness good).

14. Power supply 3∮，AC380V，10A

After all the multiple safety protection device, ensure the safety of personnel (and also in shut-down control)   

Lubricating oil filling: the machine is equipped with grease gun, butter is better than ordinary oil, improve the service life of the whole machine.

Stainless steel production, easy to clean, no pollution, no rust, permanent use.